Table 1. NI FlexRIO Documentation Locations and Descriptions (Continued)
Document
NI FlexRIO Help
LabVIEW Examples
IPNet
NI FlexRIO product
page
Required Components
The following items are necessary to set up and use your NI FlexRIO system:
•
The NI FlexRIO hardware device, comprised of the following items:
–
NI 7975R
–
NI FlexRIO adapter module
You can use the NI FlexRIO FPGA module without an adapter module for
Note
coprocessing or peer-to-peer streaming. The adapter module installation instructions
in this document do not apply to these circumstances.
The following figure shows the combined module.
Location
Available from the Start menu
and at ni.com/manuals.
Available in NI Example
Finder. In LabVIEW, click
Help»Find Examples»
Hardware Input and
Output»FlexRIO.
ni.com/ipnet
ni.com/flexrio
NI PXIe-7975R FPGA Module Getting Started Guide | © National Instruments | 3
Description
Contains information about the
FPGA module, adapter module,
and CLIP configuration
information.
Contains examples of how to run
FPGA VIs and Host VIs on your
device.
Contains LabVIEW FPGA
functions and intellectual property
to share.
Contains product information and
data sheets for NI FlexRIO
devices.