Installing The Ni Flexrio Devices; Unpacking; Preparing The Environment - National Instruments NI PXIe-7975R Getting Started Manual

and by selecting Start»All Programs»National Instruments»NI FlexRIO»NI FlexRIO
Adapter Module Documentation.
Related Information
Required Components
NI FlexRIO FPGA Module Signals
Installing the NI FlexRIO FPGA Module

Installing the NI FlexRIO Devices

You must install the software before installing the hardware.
Note

Unpacking

The NI 7975R modules ship in antistatic packages to prevent electrostatic discharge from
damaging module components. To prevent such damage when handling the modules, ground
yourself using a grounding strap or by holding a grounded object, such as your computer
chassis, and complete the following steps:
1. Touch the antistatic package to a metal part of the computer chassis before removing the
module from the package.
Caution
2. Remove each module from the package and inspect it for loose components or any other
sign of damage.
Notify NI if the modules appear damaged in any way. Do not install a damaged module into
the chassis.

Preparing the Environment

Ensure that the environment you are using the NI 7975R in meets the following specifications.
Operating temperature (IEC ............................................................................
60068-2-1, IEC60068-2-2)
............................................................................ Operating humidity
(IEC 60068-2-56)
............................................................................ Pollution Degree
............................................................................ Maximum altitude
Indoor use only.
Refer to the NI PXIe-7975R Specifications at
Note
specifications.
6 | ni.com | NI PXIe-7975R FPGA Module Getting Started Guide
on page 3
on page 10
on page 7
Never touch the exposed pins of connectors.
0 °C to 55 °C
10% to 90% RH, noncondensing
2
2,000 m at 25 °C ambient temperature
ni.com/manuals
for complete