Facsimile Specifications; Paper Specifications; Overview - Toshiba e-studio 200s User Manual

Facsimile Specifications

Item
Compatibility ITU-T Group 3
Public Switched Telephone Network (PSTN) or
Applicable line
behind PABX
Data coding MH/MR/MMR (ECM Mode)/JPEG
Modem speed 33.6 Kbps
Approx. 3 seconds/page
* Transmission time applies to memory
Transmission speed
transmission of text data with ECM compression
using only ITU-T No.1 Chart.
Maximum document Platen: 11.7 in. (297 mm)
length ADF: 14 in. (356 mm)
Paper size Letter, A4, Legal, Folio, Executive, B5
Standard: 203 x 98 dpi
Fine: 203 x 196 dpi
Resolution Super Fine: 300 x 300 dpi
Photo: 203 x 196 dpi
Color: 200 x 200 dpi
Memory 2 MB
Halftone 256 levels
Auto dialer Speed dialing (up to 100 numbers)
Description
Specifications

Paper Specifications

Overview

Your machine accepts a variety of print materials, such as cut-
sheet paper (including up to 100% recycled fiber content
paper), envelopes, labels, transparencies and custom-size
paper. Properties, such as weight, composition, grain and
moisture content, are important factors affecting the machine's
performance and the output quality. Paper that does not meet
the guidelines outlined in this user's guide can cause the
following problems:
• Poor print quality
• Increased paper jams
• Premature wear on the machine.
N :
OTES
• Some paper may meet all of the guidelines in this guide and
still not produce satisfactory results. This may be the result
of improper handling, unacceptable temperature and
humidity levels, or other variables over which TOSHIBA TEC
has no control.
• Before purchasing large quantities of paper, insure the paper
meets the requirements specified in this user's guide.
C
: Using paper that does not meet these
AUTION
specifications may cause problems, requiring repairs. These
repairs are not covered by the warranty or service
agreements.
10.3