Page 1
P.A. Series Mixing Amplifier MP210UB/MP310UB/MP610UB/MP1010UB O W N E R ’ S M A N U A L Welcome to use the public address system manufactured. For the better application of this equipment, please read the operation instruction carefully prior to use.
DSPPA MIXING AMPLIFIER FEATURES The integral broadcasting power amplifier integrating MP3 player, FM tuner, partitioner (6 partitions), preamplifier and power amplifier. MP3/TUNER is subject to remote control, and it is possible to control the conversion between MP3/TUNER, selection of program, adjustment of volume, option repeat mode, and selection of EQ mode and so on by means of infrared remote control;and selection USB/SD.
DSPPA MIXING AMPLIFIER FRONT PANEL Power Switch LED Power Indicator Bass Adjustment Button Treble Adjustment Button Line Input Volume Adjustment Button MIC Input Volume Adjustment Button MIC 1 Priority Input Jack Zone Volume Adjustment Button (1-6) Zone Level Indicator 10. Chime Button 11.
DSPPA MIXING AMPLIFIER REAR PANEL Mute control Button MIC 2 Input Jack AUX Input Jack 1, 2, 3 AUX Output Jack (Link with another amplifier or recording equipment) 6-zone Output AC Power Source Insert Fan Exhaust Window Speaker Output Terminal AC Power Fuse 10.
DSPPA MIXING AMPLIFIER CONNECTIONS (without multi-zone outputs) MIC 3 MIC 4 MIC3 VOL MIC4 VOL MIC3 IN MIC4 IN FM ANTENA SPEAKER OUTPUT 4-16Ω FM(75? ) F4AL250V ZONE OUTPUT MIC2 AUX1 AUX2 AUX3 Nur Sicherung 250V Use Only With A 250V Fuse...
DSPPA MIXING AMPLIFIER Instructions to Infrared Remote Controller 1. MP3/TUNER switch button. 2. Mode:MP3 and tuner conversion button. 3. Mute: MP3/TUNER mute button. Press this button once, and the content displayed in LED will flash after the played program is muted;...
DSPPA MIXING AMPLIFIER Operating Instructions According to the connecting diagram above, connect the circuit of the system properly, plug in the power supply in case of no mistake in check, and then turn on the power switch on the front panel. After such startup, this equipment will play the program which is played upon the previous shutdown in the default state.
Page 9
DSPPA MIXING AMPLIFIER function, so the channel played upon the shutdown will be played automatically upon the next startup. radio b.By use of the button “ ” on the machine panel or the button “U/SD” on the infrared remote controller, it is allowed to search from low-frequency stage to high-frequency stage automatically.
DSPPA MIXING AMPLIFIER MUTE FUNCTION MIC 1 Input Jack and Chime Button have the highest level of priority. Input signals from them can override other input signals. The grade of this MUTE function can be adjusted. MUTE PRECAUTION OF INSTALLATION 1.
Page 11
DSPPA MIXING AMPLIFIER SPECIFICATIONS Specifications are subject to change without notice Model MP-210UB MP-310UB MP-610UB MP-1010UB Rated Output 120W 250W 350W Output Regulation Less than 3dB, from off-load to full load Microphone : ≤3mV (unbalanced) Input sensitivity Line: ≤300mV (unbalanced) Frequency Response 80Hz-16kHz (±3dB)
Page 12
DSPPA MIXING AMPLIFIER CAUTION ● When the “Power switcher” is off, please pull out the power cord from the socket. Please keep the equipment out of water. To reduce the risk of electric shock, do not remove the cover. ●...
Need help?
Do you have a question about the MP210UB and is the answer not in the manual?
Questions and answers