Advertisement
Getting Started
of the system after a certain period of time even if the session is active. To configure the absolute timeout
setting, see
For a list of all system changes that cause you to be automatically logged out of Firepower Chassis Manager,
see
System Changes that Cause Firepower Chassis Manager Sessions to be
Note
You can optionally configure your Firepower Chassis Manager to allow only a certain number of unsuccessful
login attempts before the user is locked out of the system for a specified amount of time. For more information,
see
Procedure
Step 1
To log in to the Firepower Chassis Manager:
a) Using a supported browser, enter the following URL in the address bar:
https://<chassis_mgmt_ip_address>
where <chassis_mgmt_ip_address> is the IP address or host name of the Firepower 4100/9300 chassis
that you entered during initial configuration.
Note
b) Enter your username and password.
c) Click Login.
You are logged in and the Firepower Chassis Manager opens to show the Overview page.
Step 2
To log out of the Firepower Chassis Manager, point at your username in the navigation bar and then select
Logout.
You are logged out of the Firepower Chassis Manager and are returned to the login screen.
Accessing the FXOS CLI
You can connect to the FXOS CLI using a terminal plugged into the console port. Verify that the console port
parameters on the computer terminal (or console server) attached to the console port are as follows:
• 9600 baud
• 8 data bits
• No parity
• 1 stop bit
You can also connect to the FXOS CLI using SSH and Telnet. The FXOS supports up to eight simultaneous
SSH connections. To connect with SSH, you need to know the hostname or IP address of the Firepower
4100/9300 chassis.
Use one of the following syntax examples to log in with SSH, Telnet, or Putty:
Configuring the Absolute Session
Set the Maximum Number of Login
For information on supported browsers, refer to the release notes for the version you are using (see
http://www.cisco.com/c/en/us/support/security/firepower-9000-series/products-release-notes-list.htm
Timeout.
Attempts.
Accessing the FXOS CLI
Closed.
Getting Started
9
Advertisement
