Cisco Firepower 4100/9300 Quick Start Manual page 10

Accessing the FXOS CLI

Note

SSH log in is case-sensitive.

From a Linux terminal using SSH:

• ssh ucs-auth-domain\\username@{UCSM-ip-address|UCMS-ipv6-address}

ssh ucs-example\\jsmith@192.0.20.11

ssh ucs-example\\jsmith@2001::1

• ssh -l ucs-auth-domain\\username {UCSM-ip-address| UCSM-ipv6-address| UCSM-host-name}

ssh -l ucs-example\\jsmith 192.0.20.11

ssh -l ucs-example\\jsmith 2001::1

• ssh {UCSM-ip-address | UCSM-ipv6-address | UCSM-host-name} -l ucs-auth-domain\\username

ssh 192.0.20.11 -l ucs-example\\jsmith

ssh 2001::1 -l ucs-example\\jsmith

• ssh ucs-auth-domain\\username@{UCSM-ip-address|UCSM-ipv6-address}

ssh ucs-ldap23\\jsmith@192.0.20.11

ssh ucs-ldap23\\jsmith@2001::1

From a Linux terminal using Telnet:

Note

Telnet is disabled by default. See

• telnet ucs-UCSM-host-name ucs-auth-domain\username

telnet ucs-qa-10

• telnet ucs-{UCSM-ip-address|UCSM-ipv6-address}ucs-auth-domain\username

telnet 10.106.19.12 2052

ucs-qa-10-A login: ucs-ldap23\blradmin

From a Putty client:

• Login as: ucs-auth-domain\username

Note

If the default authentication is set to local, and the console authentication is set

to LDAP, you can log in to the fabric interconnect from a Putty client using

ucs-local\admin, where admin is the name of the local account.

Getting Started

Configuring Telnet

for instructions on enabling Telnet.

Getting Started