Advertisement
Getting Started
Enforce strong password? (yes/no) [y]: n
Enter the password for "admin": Farscape&32
Confirm the password for "admin": Farscape&32
Enter the system name:
Supervisor Mgmt IP address : 10.80.6.12
Supervisor Mgmt IPv4 netmask : 255.255.255.0
IPv4 address of the default gateway : 10.80.6.1
The system cannot be accessed via SSH if SSH Mgmt Access is not configured.
Do you want to configure SSH Mgmt Access? (yes/no) [y]: y
SSH Mgmt Access host/network address (IPv4/IPv6): 10.0.0.0
SSH Mgmt Access IPv4 netmask: 255.0.0.0
Firepower Chassis Manager cannot be accessed if HTTPS Mgmt Access is not configured.
Do you want to configure HTTPS Mgmt Access? (yes/no) [y]: y
HTTPS Mgmt Access host/network address (IPv4/IPv6): 10.0.0.0
HTTPS Mgmt Access IPv4 netmask: 255.0.0.0
Configure the DNS Server IP address? (yes/no) [n]: y
Configure the default domain name? (yes/no) [n]: y
Following configurations will be applied:
Apply and save the configuration (select 'no' if you want to re-enter)? (yes/no): y
Applying configuration. Please wait...
.....
Initial Setup complete, Terminating sessions
.Connection to <ip_address> closed.
Step 5
To configure your system using the FXOS REST API:
firepower-9300
DNS IP address : 10.164.47.13
Default domain name : cisco.com
Switch Fabric=A
System Name=firepower-9300
Enforced Strong Password=no
Supervisor Mgmt IP Address=10.89.5.14
Supervisor Mgmt IP Netmask=255.255.255.192
Default Gateway=10.89.5.1
SSH Access Configured=yes
SSH IP Address=10.0.0.0
SSH IP Netmask=255.0.0.0
HTTPS Access Configured=yes
HTTPS IP Address=10.0.0.0
HTTPS IP Netmask=255.0.0.0
DNS Server=72.163.47.11
Domain Name=cisco.com
Low-Touch Provisioning Using Management Port
Configuration file – Ok
Getting Started
7
Advertisement
