PSS SB DI16
Introduction
This shortform explains the function and operation of the decentralised
input/output module PSS SB DI16.
The documentation is intended for instruction and should be retained for
future reference.
Validity of the documentation
The PSS SB DI16 documentation is valid from Version 2.1 onwards. It is
valid until new documentation is released. The latest documentation is
supplied with the unit.
Overview
The module provides 16 digital inputs and 4 dedicated test pulse outputs.
The inputs are suitable for connecting single or dual-channel safety-
related input devices, with or without test pulses. Inputs can be assigned
to two I/O-Groups in SafetyBUS p.
Each test pulse output has 4 terminals, which can also be configured in
pairs as 24 VDC terminals.
The PSS SB DI16 requires a 24 V supply, which feeds both the module
electronics and the dedicated test pulse outputs.
The module is galvanically isolated from SafetyBUS p via optocouplers.
NOTICE
Before installing the module you should read and consider the "PSS SB
DI16 Installation Manual" and the "SafetyBUS p System Manual".
2
Operating Manual