Table of Contents

Advertisement

9.2 How to fill the rinse aid
dispenser
CAUTION!
The compartment (B) is for rinse aid only.
Do not fill it with detergent.

10. DAILY USE

1. Open the water tap.
2. Press and hold
activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme
is complete.
10.1 ComfortLift
CAUTION!
Do not sit on the rack or put excessive
pressure on the locked basket.
CAUTION!
Do not exceed the max load capacity of
18 kg.
20
ENGLISH
A
B
C
until the appliance is
CAUTION!
Only use rinse aid designed specifically
for dishwashers.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid
reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the lid locks
into position.
Fill the rinse aid dispenser when the
indicator (A) is clear.
CAUTION!
Make sure that items do not stick out of
the basket frame as it can cause damage
to the items and the ComfortLift
mechanism.
The ComfortLift mechanism allows to lift the
lower rack up (to the second rack level) and
put it down to load and unload dishes easily.
To load or unload the lower basket:
1. Lift the basket by pulling the rack out of
the dishwasher by the basket handle. The
trigger handle should not be used.

Advertisement

Table of Contents
loading

Table of Contents