An Error Message Saying There Is Insufficient Memory Appears - Sony CLIE PEG-NX73V Frequently Asked Questions Manual

®
The HotSync operation does not start and a message is
displayed on the screen
B If you set the IR port to search automatically for the target IR devices on
your computer, follow the procedure below to reset the IR port setting.
1 Click Start, select Settings (except for Windows XP), and click
Control Panel.
2 Double-click the Infrared icon (the Wireless Link icon in Windows
2000 Professional/Windows XP).
3 Click the Sending image tab.
4 Clear the check box Send the image from the digital camera
to your computer using the wireless link and click OK.
5 Click the HotSync
your computer screen and select InfraRed from the shortcut menu.
An error message saying there is insufficient memory
appears while receiving data using the IR port or the
Bluetooth™ communication (for Bluetooth™ built-in
models only)
B To receive data using the IR port or the Bluetooth™ communication, the free
space of your CLIÉ handheld's memory must be more than twice the size of
data to be received. If there is insufficient memory space in your CLIÉ
handheld, delete any unnecessary data (after backing up any of that data you
might need in the future) and try receiving data again.
B Perform a soft reset by pressing the RESET button.
b
For details, refer to "Basic operations of your CLIÉ™ handheld: Restarting
your CLIÉ handheld" in the "Read This First (Operating Instructions)."
icon in the task tray at the bottom right of
19