Error Messages; An Error Message Appears Repeatedly - Sony PEG-TJ27 CLIE Handbook (primary manual) Operating Instructions Manual

Applications do not operate properly after a soft
reset is performed
B If you encounter application problems (such as improper operations, unusual display,
or freezing during a soft reset) after you performed a reset, the reset may not be
completed properly. In such a case, perform a soft reset once again (page 35). If you
still cannot solve your problem, try a hard reset (page 36).
Note on performing a reset
After performing a reset, do not press the RESET button at the back of your CLIÉ
handheld again until the Preferences screen or the Setup screen is displayed.
I cannot use the Jog Dial™ navigator
B The Jog Dial™ navigator (page 68) is not available for some applications.

Error messages

An error message appears repeatedly

B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld
(page 35).
The message "Invalid process" appears when an
application is started
B If there is insufficient memory space in your CLIÉ handheld or "Memory Stick" media,
applications may not work properly. Delete any unnecessary data/files.
Tip
You can check the memory space in your CLIÉ handheld or "Memory Stick" media by tapping
at the top right of the CLIE Launcher and select [(All)].
I cannot enter text properly
My CLIÉ handheld does not recognize handwritten
characters (when using Graffiti
B To have your CLIÉ handheld recognize handwritten characters entered with the stylus,
you must use Graffiti
b
For details, refer to "Entering text on your CLIÉ™ handheld: Using Graffiti
enter text" in the "Handbook" (PDF format).
B Make sure you enter the Graffiti
B Make sure you enter the Graffiti
writing area and numbers in the right side (page 75).
®
2.
®
2 strokes in the Graffiti
®
2 strokes for letters in the left side of the Graffiti
®
2 )
®
®
2 writing area (page 75).
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
2 writing to
®
2
53