TRENDnet TV-IP1328PI User Manual page 29

TRENDnet User's Guide
 Day/Night Switch
Select the Day/Night Switch mode according to different surveillance
demand.
Day, Night, Auto, Scheduled‐Switch, and Triggered by alarm input are
selectable for day/night switch.
Day: the camera stays at day mode.
Night: the camera stays at night mode.
Auto: the camera switches between the day mode and the night mode
according to the illumination automatically. The sensitivity ranges from
0 to 7, the higher the value is, the easier the mode switches. The filtering
time refers to the interval time between the day/night switch. You can
set it from 5s to 120s.
Scheduled‐Switch: Set the start time and the end time to define the
duration for day/night mode.
Triggered by alarm input: The switch is triggered by alarm input. You can
set the triggered mode to day or night.
Smart Supplement Light: Set the supplement light as ON, and Auto and
Manual are selectable for light mode.
© Copyright TRENDnet. All Rights Reserved.

Select Auto, and the supplement light changes according to the actual
luminance. E.g., if the current scene is bright enough, then the
supplement light adjusts itself to lower power; and if the scene is not
bright enough, the light adjusts itself to higher power.
Select Manual, and you can adjust the supplement by adjusting the
distance. E.g., if the object is near the camera, the device adjusts the
supplement light to lower power, and the light is in higher power if the
object is far away.
Backlight Settings
BLC Area: If you focus on an object against strong backlight, the
object will be too dark to be seen clearly. BLC compensates light to
the object in the front to make it clear. OFF, Up, Down, Left, Right,
Center, Auto, and Custom are selectable.
Note: If BLC mode is set as Custom, you can draw a red rectangle
on the live view image as the BLC area.
WDR: Wide Dynamic Range can be used when there is a high contrast of
the bright area and the dark area of the scene.
HLC: High Light Compression function can be used when there are strong
lights in the scene affecting the image quality.
TV‐IP1328PI
29