TRENDnet User's Guide
This operation requires admin password to proceed.
For the exported file, you also have to create an encryption password.
The encryption password is required when you import the file to other
cameras.
Diagnose Information: click to download log and system information.
Import Config. File
Configuration file is used for the batch configuration of the cameras.
Steps:
1. Click Browse to select the saved configuration file.
2. Click Import and input the encryption password that you set during
exporting.
Note: You need to reboot the camera after importing configuration file.
Upgrade: Upgrade the device to a certain version.
Steps:
1. Select firmware or firmware directory to locate the upgrade file.
Firmware: Locate the exact path of the upgrade file.
Firmware Directory: Only the directory the upgrade file belongs to
is required.
© Copyright TRENDnet. All Rights Reserved.
2. Click Browse to select the local upgrade file and then click Upgrade
to start remote upgrade.
Note: The upgrading process will take 1 to 10 minutes. Please don't
disconnect power of the camera during the process, and the camera
reboots automatically after upgrade.
TV‐IP1328PI
13