LG R3-PRIME Owner's Manual page 13

Table of Contents

Advertisement

global_main.book.book Page 13 Monday, July 10, 2023 3:22 PM
5
Place the home station on a flat and firm
indoor floor and place it hard against to a
suitable wall in your selected location. Do not
install, store or place the home station
charging dock or the robot cleaner in any
outdoor or sheltered outdoor location.
• Remove all obstacles from around the home
station.
6
Connect the adapter to a wall outlet.
NOTE
• If two robot cleaners are used together, there
should be at least 1.5 m distance between home
stations.
- If the home stations are too close together,
the robot cleaner may not be able to return to
its home station.
• Do not install the home station on a carpet.
Charging the Robot Cleaner
Always keep the power plug of the home station
connected to an electrical outlet. The robot cleaner
can only find the home station for it to recharge
when power is supplied to the home station. If the
home docking station is moved while the robot
cleaner is cleaning, then it will not be found by the
robot cleaner when it needs to return for re
charging or when cleaning is completed.
BEFORE USING
1
Remove both foam strips from the sides of the
collision bumper.
2
Connect the power plug to an electrical outlet
and connect the cord to the power terminal in
the bottom of the home station.
3
Place the robot cleaner on the home station,
align the centre of the robot cleaner with the
centre of the home station and push the robot
cleaner from behind.
• When the white indicator on the charging
dock goes off, charging will begin.
• The robot cleaner returns to the home
station on its own to charge the battery
when cleaning is finished or battery
becomes low. If the robot cleaner returns to
the home station due to low battery, it will
resume cleaning after the battery is fully
charged.
NOTE
• The battery is a consumable. The battery life and
service life will decrease based on the years of
usage and hours of use.
• If the robot cleaner cannot be charged without
presenting with a problem or malfunction, check
if the charging terminals are contaminated by a
foreign substance, and clean the home station
with a dry towel.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents