Operation Control Panel; Cleaning - LG R3-PRIME Owner's Manual

global_main.book.book Page 15 Monday, July 10, 2023 3:22 PM
OPERATION
Control Panel
Touch Buttons
Press the button icons to start the robot cleaner.
Button
t
a
• Press and hold t button for 3 seconds to turn
the appliance on or off.
- The button can't be pressed when charging.
• Press the button to start or pause cleaning when
the robot cleaner is on.
Button
h
b
• Press button once to send the robot cleaner
h
to its home station to charge.
• Press button again to cancel.
h
+ Buttons
t h
c
• Press t + h buttons for 3 seconds to connect
the robot cleaner to the LG ThinQ application.
Status Display
Indicator
Ring light
Wi-Fi Indicator

Cleaning

Using the Mop Pad
1
Take out the water tank, fill it with water, and
put it back inside the robot cleaner.
• Fill the water tank only with purified room
temperature water to avoid a buildup of
limescale from hard water. Do not use
detergents or cleaners, as they may damage
the water tank and the appliance.
• To add water to the water tank or install the
mopping module, pause the sweeping first.
Do not move the robot cleaner manually.
OPERATION
15
State
Operation/Pause:
Always on in white
Recharging: Flashing
in white
Charging: Pulsing in
white
Charging completed:
Always on in white
Low battery charging:
Pulsing in orange
Low battery
recharging/abnormal
operation: Pulsing in
orange
During configuration:
Flashing in blue
Configuration
successful: Always on
in blue