RedMax RZT42 Operator's Manual page 26

Hide thumbs Also See for RZT42:
Table of Contents

Advertisement

Available languages

Available languages

Examine the product for worn or damaged parts
and tighten loose screws and nuts.
Remove the battery. Clean it, charge it, and keep
it cool during storage.
Replace the engine oil, and discard the waste oil.
Empty the fuel tank. Start the engine and run it
until there is no remaining fuel in the carburetor.
Note:
Do not empty the fuel tank and
carburetor if a stabilizer has been added.
Remove the plugs and put about a tablespoon of
engine oil into each cylinder. Manually turn the
engine shaft to apply the oil and put the plugs
back on.
Lubricate all grease nipples, joints and axles.
Keep the product in a clean and dry area and put
a cover on it for more protection.
Disposal
Chemicals can be dangerous and must not be
discarded on the ground. Always discard used
chemicals at a service center or an applicable
disposal location.
When the product is worn out, send it to the
dealer or to an applicable recycling location.
Oil, oil filters, fuel and the battery can have
negative effects on the environment. Obey
the local recycling requirements and applicable
regulations.
Do not discard the battery as domestic waste.
Send the battery to a RedMax service agent
or discard it at a disposal location for used
batteries.
26
2236 - 001 - 18.08.2023

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents