RedMax RZT42 Operator's Manual page 24

Hide thumbs Also See for RZT42:
Table of Contents

Advertisement

Available languages

Available languages

Problem
There is vibration in the product.
The engine becomes too hot.
The battery does not charge.
The product moves slowly, with irregular
speed or not at all.
The drive of the blades do not engage.
The transaxle leaks oil.
24
Cause
The blades are loose. Refer to
19 .
One or more of the blades are not balanced. Refer to
ine the blades on page 19 .
The engine is loose.
The air filter or the cooling fins are clogged.
There is overload in the engine.
The airflow around the engine is not sufficient.
The engine speed regulator is damaged.
The oil level is too low.
There is dirt in the fuel line.
The spark plug is damaged.
The connection at the cable connectors on the battery terminals
To clean the battery on page 16 .
is bad. Refer to
The charging cable is disconnected.
The charging system is damaged.
The parking brake is engaged.
The bypass linkage is engaged.
The drive belt on the transmission is loose or damaged.
There is air in the hydraulic system.
The drive belt on the mower deck is loose.
The electromagnetic coupling contact is loose.
The drive of the blade is defective or loose from the cable con-
nectors.
A fuse is blown.
The seals, housing or gaskets are damaged.
There is air in the hydraulic system.
To examine the blades on page
To exam-
2236 - 001 - 18.08.2023

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents