Removing The Stand And Mounting The Display - ViewSonic VG3419C User Manual

Removing the Stand and Mounting the Display

Refer to the table below for the standard dimensions for mounting kits.
NOTE: For use only with a UL certified mounting kit/bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum Hole pattern
Loading (W x H)
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
NOTE: Mounting kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Remove the monitor stand.
Interface Pad
(W x H x D)
2
11
Screw
Pad Hole
Specification
M4 x 10 mm
1
Quantity
4 screws