Removing the Stand and Mounting the Display
Refer to the table below for the standard dimensions for mounting kits.
NOTE: For use only with a UL certified mounting kit/bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum
Hole pattern
Loading
(W x H)
14 kg
100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
NOTE: Mounting kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Unscrew the attached stand and carefully remove it.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
monitor. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the mounting kit to mount the monitor.
Interface Pad
(W x H x D)
100 mm
11
Screw
Pad Hole
Specification
M4 x 10 mm
Screw
Quantity
4 screws