Removing the Stand and Mounting the Display
Refer to the table below for the standard dimensions for mounting kits.
NOTE: For use only with a UL certified wall mount kit/bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum
Hole pattern
Loading
(W x H)
14 kg
100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
NOTE: Mounting kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Push and hold the quick release tab and carefully lift the stand.
4. Pull down slightly to disengage the hooks and remove the stand.
Interface Pad
(W x H x D)
12
Screw
Pad Hole
Specification
M4 x 10 mm
Quantity
4 screws