Audio Loop Test - Grandstream Networks GSC3516 User Manual

Playback Cascade
Select the cascade role. Only cascading on the same network segment is supported and only one Master is allowed. You can set the cascade
role to either "Slave", "Master", or "None", By Default, it is set to "Slave".
Multicast In the case of a Master Cascade role, Enter the multicast address and port. As the Master, multicast will be initiated by
Address this address. As the Slave, it will automatically obtain the address initiated by the Master.
Forwarding
This options selects the type of audio to forward. it can be Music Media , call or alarm.
Category
Playback Configures the activation time. Up to 3 entries can be configured. When the activation time is not set, the default time is a
time full day.
Configures the activation frequency from Monday to Sunday. Up to 7 days can be selected. The default value is not
Frequency
selected.
GSC Assistant
Managed by GSC Assistant App
Device Label
Diagnostic Page Definitions

Audio Loop Test

An audio loop test is used to test the MICs. Each one of the MICs is tested separately.
Note
The following feature is available on the GSC3516 only
Playback Cascade
Cascade role
Trigger Time
Gives the option to add a triggering time for the Playback
Playback Cascade
GSC Assistant
Configures the ability for the device to be detectable by the GSC Assistant App.
Enabled by Default.
Defines under what label the GSC shows up during the scan.