Grease Filters And Edge Extraction Panel - Miele DA 2668 Operating And Installation Instructions

Important for the controls
Do not leave soiling on the controls
for any length of time.
Otherwise they may suffer
discolouration or damage.
Remove any soiling immediately.
 Observe the general notes on
cleaning earlier in this section.
Do not use stainless steel cleaning
agents on the controls.
Cleaning and care
Grease filters and edge
extraction panel

Fire hazard!
Oversaturated grease filters are a fire
hazard.
Clean the grease filters at regular
intervals.
The edge extraction panel and the re-
usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
rangehood.
The grease filters and the panel must be
cleaned at regular intervals.
Heavily soiled grease filters hinder air
extraction and will lead to increased
levels of soiling in the rangehood and
in the kitchen.
Grease filter cleaning intervals
Grease which has collected in the
rangehood hardens over time and
makes cleaning more difficult. It is
therefore recommended that the edge
extraction panel and the grease filters
should be cleaned regularly (at least
every 3–4 weeks) to avoid a build-up of
grease.
The operating hours counter will remind
you to clean the edge extraction panel
and the grease filters regularly via the
grease filter symbol  lighting up.
 You can set the operating hours
counter to suit the type of cooking
you do (see "Operation").
37