Grease Filters And Panel For Edge Extraction - Miele DAD 4840 Operating And Installation Instructions

Grease filters and panel for
edge extraction

Fire hazard
Oversaturated grease filters are a fire
hazard.
Clean the grease filters at regular
intervals.
The edge extraction panel and the re-
usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
The grease filters and the panel must be
cleaned at regular intervals.
Heavily soiled grease filters hinder air
extraction and will lead to increased
levels of soiling in the cooker hood
and in the kitchen.
Cleaning interval
The edge extraction panel should be
cleaned regularly (at least every 3 - 4
weeks) to avoid a build-up of grease.
The operating hours counter will
illuminate the grease filter symbol  to
remind you to clean the edge extraction
panel and the grease filters regularly.
Cleaning and care
Removing the panel and grease
filters
Opening the panel
 With the deflector plate retracted,
touch the On/Off switch .
 Touch the lighting control  briefly.
The deflector plate extends.

Risk of crushing
If you switch off the fan and the
lighting when the deflector plate is
extended, the deflector plate will
automatically retract after 1 minute.
Risk of injury. Risk of damage to the
opened panel.
To prevent the deflector plate from
retracting, leave the lighting switched
on.
The panel is held in place by magnets.
 Pull the top of the panel forwards and
swing it open.
35