Advertisement
• Bluetooth: Short press the BT button on the remote control or repeatedly pressing the
MODE button on the soundbar control panel until BT is shown on the LED display. The
LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure
that the device you wish to connect is also in pairing mode and search for "HD-059AT"
in its device list. When the two devices are paired, the LED display on the soundbar will
stop flashing and remain constant. (The soundbar will now automatically re-pair with
this device whenever it is within range and has Bluetooth turned on.) Once paired, the
remote control can be used to play, pause and navigate between tracks on compatible
iOS and Android devices.
Note:
Hold the BT button on the remote control to disconnect the Bluetooth connection
between the phone and the soundbar; short press to switch to BT mode.
• USB media mode: The soundbar is compatible with USB flash drives of up to 64GB in
size and can play audio files directly. Insert a compatible drive into the USB port on the
back of the soundbar and the unit will automatically switch to USB mode and play the
first compatible track. The media controls on the remote control can be used to play,
pause and navigate between tracks on the flash drive and the LED display will indicate
the current track time.
USB repeat mode (also accessed via the remote control) enables single track repeat
(ONE), all track repeat (ALL).
The media player also has a memory function that will recall and continue from the
last-played point when a USB flash drive that has previously been used with the
soundbar is reinserted.
• Equalizer modes: The soundbar has three equalizer default settings which tailored to
different music style. Press the EQ button on the remote control to choose among
Music mode (EQ1), Movie mode (EQ2), News mode (EQ3).
Using DOLBY ATMOS
1.
Ensure the connected device and the content supports Dolby Atmos.
2.
Set the audio format on the connected device (for example, Blu-ray player, TV) to
either "Bitstream", "Auto" or "Bypass" to skip the encoding process. This allows the
soundbar to receive the non-decoded audio signal.
Note:
Dolby Atmos is only available in HDMI IN and HDMI eARC modes.
Advertisement
