Need More Help - BenQ AQCOLOR Display Pilot 2 User Manual

iKeyboard Control is not working.
Check the following.
• Quit the software as instructed in
31. Restart the software and follow the instructions in
adjustment by iKeyboard Control on page
• Make sure Display Pilot 2 is available under the Applications folder
on your Mac. If it is not, reboot your computer and install the software
again.
• Make sure you have granted access to this software to use
accessibility and input monitoring features. Go to System Settings >
Privacy & Security > Accessibility and Input Monitoring.
- If Display Pilot 2 is not available, click
Applications. Make sure the software is allowed to control the
computer.
- If Display Pilot 2 is available and disabled, enable it so it is
allowed to control the computer.
- If Display Pilot 2 is available and enabled. Select it and click
to delete. Click
the software is allowed to control the computer.
Reboot your computer and restart Display Pilot 2. Try with
iKeyboard Control again.

Need more help?

If your problems remain after checking this manual, please visit the local
website from Support.BenQ.com
service.
Exiting the software on page
and add it from Applications again. Make sure
for more support and local customer
33
Brightness
19.
and add it from