Advertisement
INSTALLATION
Position the appliance in the desired location. The back should rest against the wall behind
it and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water
supply and drain hoses that can be positioned to the left or right to facilitate installation.
Cold water connection
Connect the cold-water supply hose to a threaded ¾" connector and ensure that it is
fastened tightly in place. If the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is clear and free of impurities. If
this precaution is not taken, there is a risk that the water inlet can get blocked and damage
the appliance.
Note: The top of the hose must
be less than 750mm.
Note:
A and B in the image are alternate suitable positions for the drainage hose.
8
Front
Drainpipe
Counter
MAX
750mm
φ
40mm
Advertisement
