Advertisement
OVERVIEW
Step 1
Switch on the appliance
Step 2
Fill the detergent
dispenser
Step 3
Check the rinse aid level
Step 4
Load the baskets
Step 5
Select a programme
Step 6
Running the dishwasher
Step 6a
Changing the programme
Press the Power switch button to switch on the appliance
and open the door.
Compartment A
With each wash cycle.
Compartment B
For programmes with pre-
wash only.
Mechanical indicator C
Electric indicator on control panel.
Scrape off any large amount of leftover food. Soften
remnants of burnt food in pans and then load the baskets.
It is not necessary to rinse the dishes under running water.
Close the door. Press the programme button until the
selected programme lights up.
(See the "Operation" section)
Turn on the water tap and press the Start/Pause button.
The machine will start working after about 10 seconds.
A running cycle can only be modified if it has been running
for a short time. Otherwise the detergent may have
already been released and the water already drained. If
this is the case, the detergent dispenser must be refilled.
Press the Start/Pause button and then press the
programme button for more than 3 seconds to cancel the
running programme.
Select a new programme.
Restart the dishwasher.
5
Advertisement
