Advertisement
How to fill
• To open the dispenser, turn the cap to the "open" (left) arrow and lift it out. Pour the
rinse aid into the dispenser, do not overfill it.
• Replace the cap by inserting it aligned with "open" arrow and turning it to the position
marked by the "close" (right) arrow.
• Be careful not to overfill the dispenser, because this could cause excessive foaming.
Note:
Clean up any rinse aid that is spilled during filling with an absorbent cloth to avoid
excessive foaming during the next wash. Don't forget to replace the cap before you close
the dishwasher door.
Adjusting rinse aid dispenser
The default setting of 4 is recommended, but the dial can be adjusted to use less rinse aid.
Detergent
One tablespoon of detergent is recommended in most cases, due to the dishwasher's
efficient function.
Push latch to open
11
Advertisement
