Aircraft Information - Cosco LIGHT 'N COMFY 35 Manual

49
9 Thread Harness Straps into
Correct Shoulder Harness Slots
for Your Child
For
6.
10
From Back of Car Seat,
Attach 1st Harness Strap
Loops to Splitter Plate As
Shown
The sewn ends of the harness strap
loops must face towards you.
Do not twist the harness strap or the
harness adjustment strap.
Make sure the harness strap loops
are fitted completely on both sides
of the splitter plate.
sewn
end
Check your child's fit often.
If you cannot achieve a snug harness fit for your child,
see pages 11-13.
To learn how to check harness tightness, see pages 19-21.
Check the harness straps often for any wear or damage.
The harness system must be installed correctly. Do not
use a child restraint with damaged harness straps.
Rear-Facing Child Fit, see page

Aircraft Information

This restraint is certified for aircraft use.
Install the car seat in a window seat to avoid blocking the aisle. If the
aircraft lap belt is too short, ask the flight attendant for a belt extender.
Use only on forward-facing aircraft seats.
Contact the airline for their specific policies.
Some airlines may ask to see a label stating
that this car seat is certified for aircraft use.
There is an airplane certification label
located on the side of this car seat as
shown.
Rear-Facing Aircraft Installation
Follow the steps on pages 38-40.
You can only install this child restraint in the
aircraft without the base.
50