Aircraft Information - Cosco EASY ELITE Manual

69
6 From Back of Car Seat,
Thread Harness Straps
Over Metal Bar
Do not twist the harness straps.
The harness adjustment strap and
the splitter plate must be behind the
harness strap as shown.
The harness strap loop ends must go
through the recline stand as shown.
7
Attach 1st Harness Strap Loops
to Splitter Plate As Shown
The sewn ends of the harness strap
loops must face towards you.
Do not twist the harness strap or the
harness adjustment strap.
Make sure the harness strap loops
are fitted completely on both sides
of the splitter plate.
sewn
end
Check your child's fit often.
To learn how to check harness tightness, see pages 54-56.
If you cannot achieve a snug harness fit for your child,
see pages 12-15.
Check the harness straps often for any wear or damage.
The harness system must be installed correctly. Do not
use a child restraint with damaged harness straps.

Aircraft Information

This restraint is certified for aircraft use when used with the
internal harness.
This restraint is not certified for aircraft use when used as a booster
seat because aircraft seats do not have shoulder belts.
Install the car seat in a window seat to avoid blocking the aisle. If the
aircraft lap belt is too short, ask the flight attendant for a belt extender.
Use only on forward-facing aircraft seats.
Contact the airline for their specific policies.
Some airlines may ask to see a label stating
that this car seat is certified for aircraft use.
There is an airplane certification label
located on the side of this car seat as
shown.
Store the lower anchor belt and tether strap when
installing with aircraft belts.
Rear-Facing Aircraft Installation
Follow the steps on pages 26-32.
Forward-Facing Aircraft Installation
Follow the steps on pages 41-46, skipping
the tether strap steps.
70