Charging The 12-V Battery - Husqvarna FE 250 Owner's Manual

15 ELECTRICAL SYSTEM
15.3
106
S03584-10

Charging the 12-V battery

Warning
Risk of injury 12 V batteries contain harmful substances.
–
Keep 12 V batteries out of the reach of children.
–
Keep sparks and open flames away from 12 V batteries.
–
Only charge 12 V batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging 12 V batteries.
Minimum clearance
–
Do not charge deeply discharged 12 V batteries if the charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of 12 V batteries with less than the minimum voltage correctly.
Note
Environmental hazard 12 V batteries contain environmentally hazardous materials.
–
Do not dispose of 12 V batteries as household waste.
–
Dispose of 12 V batteries at a collection point for used batteries.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
–
7
Connect positive cable
Guideline
Screw, battery termi-
nal
Info
A
Contact disk must be mounted under screw
9
and cable lug
terminal.
–
Slide the positive terminal cover over the positive terminal.
–
bk
Connect negative cable
Guideline
Screw, battery termi-
nal
Info
A
Contact disk must be mounted under screw
9
and cable lug
terminal.
Finishing work
–
Mount the seat. ( p. 66)
–
Install the air filter box cover. (
1 m (3 ft)
9 V
to the 12-V battery.
M5 2.5 Nm (1.84 lbf ft)
with the claws toward the battery
to the 12-V battery.
M5 2.5 Nm (1.84 lbf ft)
with the claws toward the battery
p. 67)
8
8