Table of Contents
Advertisement
OFFHOOK RING=SINGLE
NORMAL
Select NORMAL or SINGLE to change the setting.
Press the OK key to return to the Personal Ringing
menu or press the SETUP key to exit Setup Mode.
Ringing Control for Individual Line Appearances
You can control the audible ringing at your telephone for each
line appearance.
Line appearances set to ALWAYS will ring immediately. Use
this setting for your primary line appearances.
NEVER completely disables ringing on the line appearance. Use
this selection for monitored line appearances that are normally
answered elsewhere.
WAIT delays ringing at your telephone for 2 to 7 ringing cycles
(6 seconds per cycle). Use this option for backup answering on
line appearances that are primarily answered on other phones.
Calls that do not ring, due to the ringing control selection, do
not display call information and are not recorded in the call log
until audible ringing begins.
From the User Options menu, select RING.
( SETUP → USER → RING)
PERSONAL RINGING
TONE OFFHK CONTRL LCFWD
Select CONTRL.
All multifunction keys that are programmed for call
appearances will have a steady green indication.
Press a lit key to view its current ring control setting.
Teo IP Phone 7810 TSG Series User Guide
SINGLE
Local Call Forwarding – No Answer Delay
This option sets the delay in seconds before an unanswered
ringing call is forwarded.
Note: If your phone is connected to a Teo UC System, call
KEY01=ALWAYS RING
ALWAYS NEVER WAIT2 WAIT3
KEY01=ALWAYS RING
WAIT4 WAIT5 WAIT6 WAIT7
If you want to change the setting for the selected
key, select ALWAYS, NEVER, or WAIT2-WAIT7.
Consecutive line appearances that share a single phone
number will use the same ringing control setting.
Press the OK key to return to the Personal Ringing
menu or press the SETUP key to exit Setup Mode.
forwarding delay is not controlled by this option.
From the User Options menu, select RING.
( MENU → USER → RING)
PERSONAL RINGING
TONE OFFHK CONTRL LCFWD
Select LCFWD.
LOC CFWD NOANSWR SEC=12
DELETE CLEAR 123
Using the dial pad, enter the time in seconds (2-99)
to wait before forwarding a ringing call.
¤
¤
30
Advertisement
Table of Contents
