5/45 2 Devices and accessories The PC card CIFX HPCIE90-DN\F is a communication interface from Hilscher based on the communication controller netX 90 and consists of a basic card that is equipped with a detached network interface. PC card Description of the basic card...
Information and data security Take all usual measures for information and data security, in particular, for PC cards with Ethernet technology. Hilscher explicitly points out that a device with access to a public network (Internet) must be installed behind a firewall or only be accessible via a secure connection such as an encrypted VPN connection.
8 bits for identification of the PCI- Express communication, communication errors occur. Note the errata "CIFX M223090AE and CIFX HPCIE90" (Hilscher DOC-ID DOC220201ERR02EN) and the solutions and workarounds given therein. The reference is listed in the section References [} page 35] .
PC card (slave). To configure the master device, you need a device description file for the slave used with the name for: · DeviceNet Slave: HILSCHER NETX90 DN DNS.EDS The settings in the used master must match the settings in the slave.
PC card CIFX HPCIE90-DN\F: Step Description See section Downloading installation Revision or version status · Download the installation files from the Hilscher website for: files of hardware and - cifX Device Driver (atest version) software [} page 8] - Device Explorer - Communication Studio ·...
Loading firmware and configuration in the device or making an update Ø Download the firmware from the Hilscher website and save the firmware on the local hard disk of your PC. Ø If necessary, transfer the configuration to the PC. You create the configuration using a suitable configuration software.
The dimensions (L x W x H) given in the section Technical data [} page 28] (or the identical information in the product data sheet or on the Hilscher website) are rounded figures or the respective total measure (for example, including the front panel).
Hilscher Gesellschaft für Systemautomation mbH: Protocol API, DeviceNet Slave V2.7.0, Revision 18, DOC060202API18EN, Englisch, 2020-10. Documentation on drivers and software Hilscher Gesellschaft für Systemautomation mbH: User manual, PC cards CIFX HPCIE90-DN\F DeviceNet, Hardware description and installation, DOC210501UMxxEN, English, 2021-xx. Hilscher Gesellschaft für Systemautomation mbH: Operating instruction manual, cifX Device Driver, Installation and operation for Windows XP/ Vista/7/8/10, DOC060601OIxxEN, English, 2019-01.
The manual delivered with the product shall apply. Under no circumstances shall Hilscher Gesellschaft für Systemautomation mbH be liable for direct, indirect, ancillary or subsequent damage, or for any loss of income, which may arise after use of the information contained herein.
Page 39
Appendix 39/45 Liability disclaimer The hardware and/or software was created and tested by Hilscher Gesellschaft für Systemautomation mbH with utmost care and is made available as is. No warranty can be assumed for the performance or flawlessness of the hardware and/or software under all application conditions and scenarios and the work results achieved by the user when using the hardware and/or software.
Page 40
The customer hereby expressly acknowledges that this document contains trade secrets, information protected by copyright and other patent and ownership privileges as well as any related rights of Hilscher Gesellschaft für Systemautomation mbH. The customer agrees to treat as confidential all of the information made available to customer by Hilscher Gesellschaft für...
DeviceNet network to distinguish the device from any other device or slave on this network (valid address range 0 to 63). Use configuration software dialog to adjust. netX networX on chip, Hilscher network communication controller. High integrated network controller with optimized system architecture for communication and maximum data transfer. Slave...
Need help?
Do you have a question about the CIFX HPCIE90-DN/F and is the answer not in the manual?
Questions and answers