Table of Contents
Advertisement
4. Align the three plastic tabs on the front bezel with the corresponding holes in the chassis. Then pivot the
front bezel inward until it snaps into position on the top.
Figure 113. Reinstalling the front bezel
5. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover
engage the rails on the chassis. Then, push the cover to the front of the computer until it snaps into
position. Install the screws to secure the computer cover.
Figure 114. Reinstalling the computer cover
6. Place the computer in an upright position.
7. If a locking device is available, lock the computer cover. See "Locking your computer" on page 55.
8. Reconnect the external cables and power cords to the corresponding connectors on the computer. See
"Hardware locations" on page 29.
9. Update the configuration of your computer. See "Using the Setup Utility program" on page 61.
156
P330 Hardware Maintenance Manual
Advertisement
Table of Contents
