a. Insert the new ThinkStation LED into the plastic holder until it snaps into position.
Figure 83. Installing the ThinkStation LED
b. Install the ThinkStation LED cover as shown to secure the ThinkStation LED.
Figure 84. Installing the ThinkStation LED cover
c. Connect the ThinkStation LED cable to the ThinkStation LED connector on the system board. See
"Parts on the system board" on page 37.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 155.
136
P330 Hardware Maintenance Manual