3
To close the capture window, click Cancel or
Close.
Saving the captured image
With the ActiveX viewer
1
Capture the monitor image.
2
Click Save.
The Save As dialog appears.
3
Select JPEG Files or Windows Bitmap Files as
Save as type.
4
Type the File name and specify Save in, then click
Save.
With the Java applet viewer
1
Capture the monitor image.
2
Right-click the mouse to display the menu and
select Save Picture As....
The Save Picture dialog appears.
3
Select JPEG or Bit map as Save as type.
4
Type in File name and specify Save in, then click
Save.
24
Using the Trigger Button
Using the Trigger Button
You can operate various functions of the camera simply
by clicking
(trigger) in the main viewer.
Sending a monitor image via e-mail
You can send a captured still image by attaching it to an
e-mail.
To use this function, you need to make e-Mail (SMTP)
active and set the address in the Trigger menu of the
Administrator menu properly (page 65).
1
Display the image on the monitor window.
2
Select e-Mail from the trigger drop-down list.
3
Click
.
The still image of the moment you click is captured,
and your e-mail with the image file attached is sent
to the specified mail address.
Sending a monitor image to an FTP
server
You can send a captured still image to the FTP server.
To use this function, you need to make FTP client active
and set the address in the Trigger menu of the
Administrator menu properly (page 65).
1
Display the image on the monitor window.
2
Select FTP from the trigger drop-down list.
3
Click
.
The still image of the moment you click is captured,
and the image file is sent to the FTP server.
Recording a camera image as a still
image
You can capture a camera image as a still picture and
record it.
The still images are recorded in the built-in memory or
ATA memory card (not supplied).