Downloading Images From The Camera; Ftp Server Menu; Setting The Alarm Output - Alarm Output Menu - Sony IPELA SNC-CS10 User Manual

Downloading Images
from the Camera
server Menu
When you click FTP server on the Administrator menu,
the FTP server menu appears. Use this menu to set up for
the FTP server function which finds a specified image
file stored in the built-in memory of (about 8 MB) or
download the still image file from this unit.
FTP server function
To activate the FTP server function, select On and click
OK.
When you do not use the FTP server function, select Off
and click OK.
OK/Cancel
See "Buttons common to every menu" on page 28.
Note
Note the followings when log in to FTP server of this
unit using the FTP client software on the computer.
• The frame rate and the operativity of the monitor
window in the main viewer will declime.
• While recording the image using the Image memory
function, you cannot delete the recording folder.
• When the recorded image file is deleted, this unit
counts the free space of the built-in memory again
when logging off.
52
Downloading Images from the Camera — FTP server Menu / Setting the Alarm Output — Alarm output Menu
Setting the Alarm Output
— FTP — Alarm output Menu
When you click Alarm output on the Administrator
menu, the Alarm output menu appears.
You can set in this menu to control the alarm out of I/O
port on the rear of the camera linked to the alarm
detection and the timer.
Alarm output
To activate the Alarm output function, select On. The
basic setting options are displayed below.
When you do not use the Alarm output function, select
Off.
Mode
Select the mode of the Alarm output function.
Alarm: Controls alarm output by synchronizing with an
external sensor input or the built-in activity detection
function.
Timer: Controls alarm output by the timer.
Alarm
This item is displayed when Mode is set to Alarm.
Select the alarm to link the alarm output function.
Sensor input: External sensor connected to sensor input
of the camera I/O port
Motion detection: Click Motion detection button, and
the Motion detection setting page is displayed. You
can set the motion detection function (page 56).
Note
Motion detection works only when the Video mode is
set to MPEG4 and the Cropping is set to Off.