Date & Time Tab - Sony IPELA SNC-CS10 User Manual

To display the homepage built in the camera
Select /index.html.
To display your individual homepage
You can display your favorite homepage. Store the
HTML file in the built-in flash memory using the
Custom Homepage Installer included in the supplied
CD-ROM.
For use of the Custom Homepage Installer, see page 67.
1
Select User Setting/ user/.
2
Type the path of the HTML file in the text box up to
64 characters.
Tip
Even when you select User Setting/ user/, the home
page inside the camera can be displayed by typing the
following URL in the address box of the Web browser.
Example: When the IP address of the camera is set to
192.168.0.100
http://192.168.0.100/en/index.html
OK/Cancel
See "Buttons common to every menu" on page 28.
Date & time Tab
Current date & time
Displays the date and time set on this unit.
Note
After you have purchased this unit, be sure to check the
date and time of this unit and set them if necessary.
PC clock
Displays the date and time set on your computer.
30
Configuring the System — System menu
Date & time format
Select the format of date and time to be displayed on the
main viewer from the drop-down list.
You can select from among yyyy-mm-dd hh:mm:ss
(year-month-day hour:minute:second), mm-dd-yyyy
hh:mm:ss (month-day-year hour:minute:second), and
dd-mm-yyyy hh:mm:ss (day-month-year
hour:minute:second).
Adjust
Select to set the day and time.
Keep current setting: Select if you do not need to set
the date and time.
Synchronize with PC: Select if synchronizing the
camera's date and time with those of the computer.
Manual setting: Select if you want to set the camera's
date and time manually.
Select the lower 2-digits of year, month, date, hour,
minutes and seconds from each drop-down list.
Synchronize with NTP: Select if synchronizing the
camera's date and time with those of the time sever
called NTP server (Network Time Protocol). Set the
NTP server name and the Interval.
NTP server name
Type the host name or IP address of the NTP server, up
to 64 characters.
Interval
Select the interval at which you want to adjust the
camera's time referring to the NTP server' time, between
1 and 24 hours. The set interval is a guide, and does not
indicate the exact time.
Note
The setting time may not accord with the exact time
according to the network environment.
Time zone
Set the time difference from Greenwich Mean Time in
the area where the camera is installed.
Select the time zone where the camera is installed from
the drop-down list.
Automatically adjust clock for daylight saving
time changes
When you select it, the clock is automatically adjusted
according to the daylight saving time of the selected
time zone.
Note
If the time zone selected on the Time zone menu is
different from that set on the computer, the time is
adjusted using the time zone difference and set on the
camera.