Basic Configuration By The Administrator - Sony IPELA SNC-CS10 User Manual

Sony ipela snc-cs10: user guide

Hide thumbs Also See for IPELA SNC-CS10:

Install manual (2 pages)

Service manual (56 pages)

Table Of Contents

Table of Contents

Basic Configuration by

the Administrator

You can monitor the image of the camera by logging in

with the initial condition of this network camera. You

can also set various functions according to the install

position, network condition or purpose of the camera.

We recommend you configure the following items

before monitoring the image from the camera.

Setting contents

Select the white balance mode according to the installing position (under tungsten

bulb or daylight).

Set the format of the image sent from the camera (MPEG 4 or JPEG).

Select the equipped lens.

Select the brightness of the image sent from the camera.

Select the quality of the image sent from the camera.

Select the size of the image sent from the camera.

Select weather the audio from the camera microphone is sent or not. (SNC-CS11

only)

Accord date and time of the camera with those of the computer.

Make the setting for sending the monitor image attached to a mail.

Set the access right of the user for the camera.