Sony IPELA SNC-CH220 User Manual page 14

Configuring Windows Firewall
SNC toolbox may not operate correctly depending on
the configuration of Windows Firewall. (No cameras are
shown in the list even if they are detected.) In this case,
confirm the Windows Firewall configuration as follows:
Example: In the case of SNC toolbox
To turn Windows Firewall off
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
3
Select Turn Windows Firewall on or off.
4
Select Disable Windows Firewall.
The cameras will be displayed in the list.
14
Assigning the IP Address to the Camera
To turn Windows Firewall on
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
3
Select Allow a program or feature through
Windows Firewall.
4
Select Allow another program....