Configuring Windows Firewall; Starting The Software - Sony IPELA SNC-CH220 User Manual

If the message "File Download – Security Warning"
appears, click Run.
Program name
Note
If you select Save in the "File Download – Security
Warning" dialog, you will not be able to perform
installation correctly. Delete the downloaded file, and
click the Setup icon again.
If the message "Internet Explorer – Security Warning"
appears, click Run.
Program name
If the message "User Account Control – An unidentified
program wants access to your computer" appears, click
Allow.
The software installation starts.

Starting the software

When you start software such as SNC toolbox, the
message "User Account Control – An unidentified
program wants access to your computer" may appear. In
this case, click Allow.
Installing ActiveX Control
During installation of ActiveX Control, the information
bar or "Security Warning" may appear. In this case,
operate as follows:
If the message "Information Bar" appears, click Close.
If the information bar appears, click on the bar and select
Install ActiveX Control....
If the message "User Account Control – Windows needs
your permission to continue" appears, click Continue.
If "Internet Explorer – Security Warning" appears, click
Install.
Program name
The installation of ActiveX Control starts. When
installation is completed, the main viewer or the Motion
detection menu appears.

Configuring Windows Firewall

SNC toolbox may not operate correctly depending on
the configuration of Windows Firewall. (No cameras are
shown in the list even if they are detected.) In this case,
confirm the Windows Firewall configuration as follows:
Example: In the case of SNC toolbox
To turn Windows Firewall off
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
Assigning the IP Address to the Camera
11