NETGEAR WAX618-111NAS User Manual page 212

Insight Managed WiFi 6 AX3000 Access Point Model WAX618
The density level for the WiFi network is based on the following interdependent
components, for which a setting is assigned by the position of the slider but which
you cannot set individually:
• Density of the WiFi clients: In the default 11ax WiFi mode for the radios, the
setting can be very low, low, medium, high, or very high, depending on the
position of the slider.
• Compatibility with WiFi modes for legacy clients: In the default 11ax WiFi
mode for the radios, the setting can be as follows:
- 2.4 GHz: 802.11b/g/n/ax, which supports 802.11b clients, or 802.11g/n/ax,
which does not.
- 5 GHz: 802.11a/n/ac/ax, which supports all types of clients in the 5 GHz radio
band in any position of the slider.
• Overall performance for the WiFi clients: In the default 11ax WiFi mode for
the radios, the setting can be reduced, moderate, good, very good, or optimal,
depending on the position of the slider.
• WiFi coverage: In the default 11ax WiFi mode for the radios, the setting can be
very narrow, narrow, average, wide, or very wide, depending on the position of
the slider.
Note: The help text in the local browser UI provides a table with detailed information
about how the WiFi mode of a radio affects these components and how these
components depend on each other.
10. Click the Apply button.
Your settings are saved.
Manage the Advanced WiFi
Features for a WiFi network
212 User Manual