NETGEAR WAX618-111NAS User Manual page 167

Insight Managed WiFi 6 AX3000 Access Point Model WAX618
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 24.
The Dashboard page displays.
4. Select Management > Maintenance > Upgrade > Backup and Restore > Restore
Settings.
The Restore Settings page displays.
5. Click the Browse button and navigate to and select the saved configuration file.
The name of the backup file can be
WAX6XX-NETGEARYYYYYY-dd-mm-yy_hh-mm-ss-config.tar or
WAX6XX-WAX6XX-YYYYYY-dd-mm-yy_hh-mm-ss-config.tar.
6XX represents the model number, YYYYYY represents the last six hexadecimal
digits of the access point's MAC address (or the system name), dd is the date, mm
is the month, yy is the year, hh is the hour (in 24-hour format), mm is the minutes,
and ss is the seconds.
Examples of the name of a backup file are
WAX6XX-NETGEAR1A2B3C-06-18-21_16-44-12-config.tar and
WAX6XX-WAX6XX-1A2B3C-06-18-21_16-44-12-config.tar.
6. Click the Restore button.
A pop-up window displays.
7. Enter the password that you specified when you saved the backup file, and click the
Continue button.
8. Click the Restore button.
The pop-up window closes and the configuration is uploaded to the access point.
When the restoration is complete, the access point reboots. This process takes about
two minutes.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the
restoration. For example, do not close the browser, click a link, or load a new page.
Do not turn off the access point. Wait until the access point finishes restarting and
the Power/Cloud LED turns solid green or solid blue.
Manage and Maintain the Access
Point
167 User Manual