ASSEMBLAD INFRAGAS-196 Operating Manual page 15

Gas analyzers
Table of Contents

Advertisement

Assemblad
if CO+CO2 is lower than 15, otherwise CO corr = CO
K)
Compare following data with the corresponding ones declared by the car
manufacturer, or with expected values:
-
CO
-
CO2
-
HC
-
O2
-
Lambda
Lambda is a parameter computed as follows:
where:
21 x [ [CO2] + ([CO]/2) + [O2] + ((HCV/4) x 3,5 / (3,5 + [CO] / [CO2]) - 0.00877) x ([CO2] + [CO]) ]
[21+0.5628 x (([CO]/[CO2]) / (3,5+([CO] / [CO2]))]x[ 1+HCV/4 - 0,01754/2] x [CO2]+[CO]+[HC] x6 x10
where HCV = 1.85 for engine supplied with Gasoline
= 2.57 for engine supplied with GPL
= 4
With [CO], [CO2] e [O2] = % in vol.
If out of range data are measured, proceed with proper repairs and adjustments on
the motorcar.
L)
After this work, print a report (*) of repairs and adjustments done.
ASSEMBLAD S.r.l. - Costruzioni Elettroniche - Via Marzabotto, 4 - 50013 Campi Bisenzio - Firenze - Italy
Tel. +39-055-890485 - Fax +39-055-890496 - E-mail: info@assemblad.it - Web: www.assemblad.it
Lambda = Num / Den
for engine supplied with Methane
Infragas-196 and Infragas-196 PC-Module * Operating manual
Num:
Den:
and HC = ppm in vol.
-4
]
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the INFRAGAS-196 and is the answer not in the manual?

Table of Contents