Initialization
To restore the network settings to the factory default state, set SETUP switch 1 to the OFF
position and press the RESET switch for at least 5 seconds.
To restore all settings of the unit to the factory default state, set SETUP switch 1 to the ON
position and press the RESET switch for at least 5 seconds.
Use the tip of a pen or other narrow object to press the RESET switch.
About the POWER and NETWORK lamps
The state of the unit is indicated by the combination of display color and lit status (lit,
blinking, not lit) of the POWER lamp and NETWORK lamp on the front panel of the unit.
POWER lamp
Lit green*
Blinking green
Lit orange
Blinking yellow
* Blinks green when a command is received from the supplied infrared remote control.
NETWORK lamp
Lit green
Not lit
Not lit
Not lit
Not lit
Unit status
Power-on (network connected)
Power-on (network not connected)
Power-on process in progress
Power standby state
Software update in progress
31
Start Guide