• AC adaptor (supplied)
• Power cord (supplied)
• LAN cable
• Network device (such as a Wi-Fi access point or switching hub)
Step 2: Attach a lens
Attach a lens to the unit, adjust the balance of the camera head and lens, and secure the
lens in position.
For details, refer to "Attaching/Removing a Lens" in the Help Guide.
Step 3: Connect the unit to the network device via cable
Connect the unit to the network device (such as a Wi-Fi access point or switching hub) using
a LAN cable.
Use a Category 5e LAN cable or higher.
24
Start Guide