Canon ip3000-srm Simplified Service Manual page 10

5) After the function (menu) is selected, press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu
selection mode automatically.)
<Destination settings procedures>
In the destination settings mode, press the Resume/Cancel button the specified number of time(s)
according to the destination listed in the table below, and press the Power button.
Times
1 time
2 times
3 times
4 times
5 times
6 times or more
Note: After setting the destination, confirm the model name in service test print or EEPROM information
print. (See APPENDIX 1, SERVICE TEST PRINT or APPENDIX 2, EEPROM INFORMATION
PRINT.)
LED
Orange Japan:
Green Other than Japan, non-support of CD-R printing (A4): iP3000
Orange Other than Japan, non-support of CD-R printing (LTR): iP3000 (LTR)
Green Other than Japan, support of CD-R printing (A4):
Orange Other than Japan, support of CD-R printing (LTR):
Return to the menu selection
Destination
10
iP3100
iP3000
iP3000 (LTR)