Table of Contents
Advertisement
QTS
Series
1.0
Introduction
Overview
The intent of this manual is to provide information regarding general safety, installation, operation and
maintenance of this radiant tube heater. You must read and understand all instructions and safety
warnings before installing or servicing the radiant tube heater.
Heater Components
Prior to installation, verify that the heater's gas type and voltage (as listed on the rating plate) match
that of your application. Also verify that you have received all heater components included with your
radiant tube heater. Refer to page 44 for a list of the kit contents for your Series heater. Materials not
included in the heater kit contents (e.g., screws, vent material, terminals, etc.) are the responsibility of
the installer. Notify your product representative or Brant Radiant Heaters Ltd. of any discrepancy or
missing kit contents prior to installing unit.
Specifications
Chart 1.1
•
QTS Series Specifications
Model Number
QTS-40N
QTS-40P
QTS-60N
QTS-60P
QTS-80N
QTS-80P
* Input at full rate.
** Recommended mounting heights are provided as a guideline. Actual conditions may dictate variations from
this data.
Shipping / Boxing:
B = Burner Control Box (15#) & (31.5"L x 17.5"W x 15.5"H)
T = Emitter Assembly and Reflector Box (88#) & (91"L x 31"W x 14"H)
NOTE: See Kit Contents on page 44.
1.0
Gas Type
BTU/h *
Natural Gas
40,000
Propane
40,000
Natural Gas
60,000
Propane
60,000
Natural Gas
80,000
Propane
80,000
Introduction
•
Overview
Recommended
Mounting
Heights**
8 to 10 ft.
8 to 10 ft.
8 to 12 ft.
8 to 12 ft.
10 to 14 ft.
10 to 14 ft.
3
•
Heater Components
•
Specifications
Overall Unit
Unit Weight
103 lbs.
103 lbs.
103 lbs.
103 lbs.
103 lbs.
103 lbs.
Length
103"
103"
103"
103"
103"
103"
Advertisement
Table of Contents
