Table of Contents
Advertisement
1.0
Introduction
•
Overview
1.0
Introduction
Overview
The intent of this manual is to provide information regarding general safety, installation, operation and
maintenance of the tube heater. You must read, and understand, the instructions and safety warnings in
this manual before installing the tube heater. Additional literature on this and other products is available
at www.brantradiant.com.
Heater Components*
Prior to installation, verify that the heater's gas type and voltage (as listed on the rating plate) match that
of your application. Also verify that you have received all heater contents included with your tube heater.
Refer to the last page for a list of the kit contents for your model heater. Materials not included in the
heater kit contents (e.g., screws, vent material, terminals, etc.) are the responsibility of the installer. Notify
your product representative or Brant Radiant Heaters Ltd. of any discrepancy or missing kit contents prior
to installing unit.
Figure 1.1
•
Heater Components*
Reflector Center Support
Tube Hanger
Reflector End Cap with Clips
Burner Control Box
Igniter/
Sensor Box
Type 1 Rubber Hose
•
Product Specifications
•
Chains are not provided in kit.
Optional accessory. P/N: THCS
Tube Clamp
16 in. Burner Tube
* Not all items illustrated may be provided with your heater.
Refer to kit contents of the last page of the Series Manual.
Heater Components
Tube Hanger
Reflector
4
DET3
Series
10 ft. Primary/
Secondary
Combustion
Chamber(s)
Radiant
Tube(s)
Baffles
Advertisement
Table of Contents
