Table of Contents
Advertisement
Getting started
Setting up the handset for use
The display is protected by a plastic film.
Inserting the batteries
Only use rechargeable batteries, as this could otherwise result in significant health
risks and personal injury. For example, the outer casing of the batteries could be
destroyed or the batteries could explode. The telephone could also malfunction or be
damaged as a result of using batteries that are not of the recommended type.
Insert the batteries
(for correct +/- direction,
see diagram).
Charging the batteries
Charge the batteries fully prior to first use in the
charging cradle or using a standard USB mains
adapter.
The batteries are fully charged when the power icon
disappears from the display.
The handset may only be placed in the designated charging cradle.
The battery may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
6
Please remove the protective film!
Fit the battery cover from
the top.
Press the cover until it clicks
into place.
To re-open the battery cover:
Insert a fingernail behind
the notch at the top of the
cover and slide it
downwards.
7 h
Advertisement
Table of Contents
